When we took it out after the summer of 2017 we were dealing with rough idle... so I used the winter downtime to rebuild the carbs with the NOS carburetor rebuild kits I got on eBay and to replace almost every nut and bolt on the motor with stainless hardware.
 |
| Lovell Marine Products NOS rebuild kits for the Carter carbs installed on Flying Scott motors. |
 |
| These are pretty basic and the rebuild is simple. The only odd part is the fuel rod spring and pin. Ideally, I need to have three custom springs wound as I haven't found anything that fits. |
love the blog and the scott rebuild...i am rebuilding a 1960 40hp scott and wonder if you have any tips on replacing the impellers
ReplyDeletecool-it-disassembly
ReplyDeleteYEs, here's what I did to replace mine... cool-it-reassembly
ReplyDelete